- 74
- 257 048
77-store
Germany
Приєднався 23 лис 2014
Watch Videos, Documentaries or Installation Instructions
77designz UG (haftungsbeschränkt) - An der Kolvenburg 8 - 48727 Billerbeck - Germany
Telefon +49 2543/2184395
E-Mail: info@77designz.com
CEO: Giacomo Großehagenbrock
VAT ID: DE275535522
District Court: Coesfeld
Commercial register: HRB 16096
77designz UG (haftungsbeschränkt) - An der Kolvenburg 8 - 48727 Billerbeck - Germany
Telefon +49 2543/2184395
E-Mail: info@77designz.com
CEO: Giacomo Großehagenbrock
VAT ID: DE275535522
District Court: Coesfeld
Commercial register: HRB 16096
7. Juli 2024
We always route the dropper cable for you. It takes only a few minutes if you know how it's done.
Переглядів: 377
Відео
Cross Country just Faster. Introducing the Kavenz VHP12
Переглядів 1,9 тис.10 місяців тому
Get ready to elevate your mountain biking experience to new heights with the Kavenz VHP12! Designed with the fundamental principle of "less travel, more fun" in mind, the VHP12 is engineered to deliver adrenaline-pumping adventures on every trail. Whether you're shredding through technical descents or exploring cross-country terrain, the VHP12 prioritizes enjoyment above all else. With its vers...
Fast and Fun
Переглядів 1,6 тис.Рік тому
Revoloop, Mountain-Reaggae-Radio, Bonanzarad, Suspension Express Filmed&edited by Arthur Schlander FPV Droneshots by David Stocker Rider: Tim Haidvogel Music: "Damaged Bug: Eggs at Night"
#kavenz #VHPG
Переглядів 720Рік тому
We made good progress on the chain tensioner for the VHP G and plan to open for pre-orders soon. #kavenz #VHPG
UDH Update is coming by end of the year and will be fully backwards compatible.
Переглядів 675Рік тому
UDH Update is coming by end of the year and will be fully backwards compatible.
New CNC for the Kavenz VHP16 arrived. We do QC and explain some details.
Переглядів 2,1 тис.4 роки тому
New CNC for the Kavenz VHP16 arrived. We do QC and explain some details.
Testing, FEM, Hardness testing and the resulting changes to the Kavenz
Переглядів 3,6 тис.4 роки тому
Testing, FEM, Hardness testing and the resulting changes to the Kavenz
Installing the 77designz 1 Piece Stem with other brands handlebars
Переглядів 4,8 тис.4 роки тому
Installing the 77designz 1 Piece Stem with other brands handlebars
We take our Enduro Frame to the DH Level Fatigue Test at EFBE
Переглядів 5 тис.5 років тому
We take our Enduro Frame to the DH Level Fatigue Test at EFBE
Changes to the Kavenz frame to pass the EFBE test bench.
Переглядів 7 тис.5 років тому
Changes to the Kavenz frame to pass the EFBE test bench.
We Develop a Bike Frame / Prototype to Product // S2:E7 /// Design Loop
Переглядів 8 тис.5 років тому
We Develop a Bike Frame / Prototype to Product // S2:E7 /// Design Loop
S2:E6 - The Kavenz at the fatigue test for Mountainbikes at EFBE
Переглядів 8 тис.5 років тому
S2:E6 - The Kavenz at the fatigue test for Mountainbikes at EFBE
We Develop a Bike Frame / Prototype to Product // S2:E5 /// Bike Check Megavalanche 2019
Переглядів 5 тис.5 років тому
We Develop a Bike Frame / Prototype to Product // S2:E5 /// Bike Check Megavalanche 2019
We Develop a Bike Frame / Prototype to Product // S2:E4
Переглядів 6 тис.5 років тому
We Develop a Bike Frame / Prototype to Product // S2:E4
We Develop a Bike Frame / Prototype to Product // S2:E3 /// The Brand
Переглядів 3,3 тис.5 років тому
We Develop a Bike Frame / Prototype to Product // S2:E3 /// The Brand
We Develop a Bike Frame / Prototype to Product // S2:E2 /// Improvements
Переглядів 3,1 тис.5 років тому
We Develop a Bike Frame / Prototype to Product // S2:E2 /// Improvements
We Develop a Bike Frame / Prototype to Product // S2:E1
Переглядів 2,7 тис.5 років тому
We Develop a Bike Frame / Prototype to Product // S2:E1
We Develop a Bike Frame / E13 // Field Testing
Переглядів 9 тис.6 років тому
We Develop a Bike Frame / E13 // Field Testing
We Develop a Bike Frame / E12 // Bike Assembly
Переглядів 5 тис.6 років тому
We Develop a Bike Frame / E12 // Bike Assembly
The protector should really be extended to the sides particularly covering the welds until just before the bearing. The ends of the protector could be wrapped around the inner side of the chain stay to prevent peeling. The paint comes of so easily with heel rub. The other side should also have heel rub protector for those riding opposite foot position.
Thanks for the feedback we thought of that but covering the area to protect against heel rub was not feasible with rubber it would have made it worth.
🎉❤
Excellent and professional🎉
🎉🤞🍀
Jay innen verlegte Leitungen 😂
Stehst Du auf Außen verlegt für Sattelstütze?
@@77-store ja und auf 26“ 😅 aber als Produzent muss man halt mit der Zeit gehen nicht mit den Trends aber mit der Zeit 🙏
Achsoo Vario, ja das is mein Fehler ja das muss natürlich sein!
Maybe next time put up a video at normal speed and provide details about the bike.
Excellent professional, beyond imagination, fast and cheerful👌💫🍀🫠💐🔥
Wir waren heute mal wieder in Tecklenburg. Konfetti auf Trails ist schon keine tolle Idee. Die dann aber nicht weg zu räumen ist aus mehreren Gründen Scheiße. Zu Akzeptanz von Trails führt das nicht.
Die Schale wurde doch ordnungsgemäß weggeräumt!
SICK
Can we put a BBSHD electric motor on it?
OneUp 20mm rise does not fit :(
Di you try with out bolts?
Siiiick
Oida Hww und ich weiß nix von ist bei mir ums Eck 😍😍😍
stoked about the result!
great work buddy
ah, im Trailcenter Wien unterwegs, leiwand!
Super smoooth 🥰
But if you pass the brake line from the bottom, you',re able to exit it at the little hole at the headtube!?!?!🤔
Yes, because the hole ain´t small.
REALLY look forward to the new seatsays! How much will the adaptors for different CS-length cost?
Probably 200€ per pair.
Mit welcher Software oder Programm habt ihr das Teil entwickelt?
Solid Works
Must be the best feeling to ride it after so much thought, design and fabrication. Well done!
Look Great! Much better than tape. Will be getting one for the vhp16 i just ordered.
An awesome product that just keeps getting better. 🤤
Congrats! Looking forward to the updates!
It fitted my Raceface Next 760 bar but was a little tight
Riding Havixbeck…
Die Umlenkung ist ein echt geniales Bauteil geworden! Liegt satt in der Hand und macht auf den Trails, was sie soll. Wo bleibt der Kettenstrebenschutz?
Ist in Arbeit 🚀👌
How tal are you and what geomtry did you try? 480 reach or longer?
Please answer this question.
hes 1,88 and has a longer reach i think he told in another video
Did you export that mock Up from linkage? Or modeled it?
Gute Sache, aber grausame Musik!
How do you shift? They used to require a fixed rear hub for the chain to drive the output gear to release the clutches going to a... lighter? (or heavier, whichever way) gear. With a freehub on the rear hub you have to backpedal to release the clutches. At least that's what they said, even after releasing a concentric output (I initially talked with them in the higher output triple axle days).
Effigear uses a Srtam trigger and yes the rearhub is fixed but only with cable ties sure thats not perfect.
MicroSpline Compatible
It's an idler pulley for high pivot bikes.
Santa Cruz 20mm Riser doesn‘t fit. Sixpack Millenium 20mm doesn’t fit 😢
I had no Problems with Santa Cruz Handlebar! It´s tight of course
How much does that bike cost
About 7.000 €
@@77-store 😳
These machines are cheap for what they are.
Gefällt mir mega! Eine Frage: Das Kavenz ist ja bekannt dafür ein relativ laufruhiges Enduro zu sein und am Boden zu kleben. Ich schätze aber auch ein poppiges Rad, da ich gerne und oft abziehe. Kann ich das etwa durch den Einbau von Luftfederung anstatt Coil erreichen? Im Video fährst du die X2. Wie verhält sich das Rad damit ggü einem Coildämpfer?
Ja du kannst es auf jeden Fall auch so Einstellen das es Spaß macht ich fahre daher am liebsten mit Luft.
Nice safety screen you've got there.
400kg
So 200 pro Seite sollten es schon sein ☑️
richtig gut erklärt. kann mir jmd sagen wie das programm heißt?
Danke, das Programm heisst Linkage.
@@florianschnepf7897 sehr cool. Viel Erfolg dabei.
Will this fit a Renthal Fatbar Carbon 35 30 mm Riser Bar? Won‘t scatch it up!
are you try it?
Cool. Endlich mal ein leicht verständliches Video zu dem Thema. Danke dafür.👍🏻 Könnte jetzt noch Stunden mitphilosfieren und ne Menge lernen...🤘🏻😎✌🏻 Cheers Btw. habe ich gerade den 77. Like abgegeben. Krieg ich jetzt so nen Rahmen von euch?🙄😅🤪
Just fitted this stem to a set of TITLE AH1 25mm rise handlebars, went on easy with no marks on the handlebar finish
That build of yours must be looking sick! I want to do the same so thanks to you I'm sure it is possible now! Cheers!
Can confirm that it does not work in combination with a 20mm rise Race Face Next 760mm wide carbon bar.
Really? I've got à 780mm Next R carbon With 20mm rise and it fits perfectly..
Race Face Next R 780 with 20 mm rise doesn't fit 😢 Lots of scratches.
love the fact that the guy wears a yeti shirt.. :D
Yeah we don´t care about such details.
Hammer Bike 😍.
Looks amazing!
Sehr geil 🤩 so ein Bike würde ich gern mal bauen 😜
Hi, will it work on enve 25mm rise handle bar?
As far as we know yes.
wie heisst denn die Software, die ihr benutzt? Abgesehn vom solid?
Linkage X3
Can you do a video of how to fit the stem on a Oneup 20mm rise handlebar? It seems like some people can fit it and some people don’t and I can’t decide if I should spend money on both or just get one of the two ( stem or handlebar)
It´s not easy to fit it that´s for sure. We will see if we can make a video.
I tried, scratched it badly, and it still didn't slip on at all.
Super spannend und klasse, dass ihr das alles so offen zeigt! Ich habe mich still und heimlich schon in ein Kavenz verliebt, aber da mein letztes Bike noch kein Jahr alt ist, werde ich noch ein wenig warten müssen :)
Danke das freut uns zu hören. Melde dich gerne wenn es soweit ist ;-)
Habt ihr auch Carbon als Rahmenmaterial auf dem Plan für die Zukunft oder setzt ihr aus Überzeugung auf Aluminium?
Hey, es ist nicht auszuschließen wir versuchen immer das beste Material für den Einsatz Bereich zu nutzen.
@@MrGiaco77 super, dann hab ich ja noch etwas Zeit bevor ich mir das kaufen muss. Hab mein neues Bike erst im Winter gekauft, muss also noch ein paar Jahre durchhalten 😂